New Hub Options!

Standards in the bike industry are an oxymoron. As soon as a standard is established, an engineer somewhere sees an opportunity to improve upon it. It’s frustrating seeing old components unable to adapt to newer frames.

Unless otherwise stated, all Indigenous Wheel Co. disc wheels are “future-proof”. You can take the end caps off the hubs and replace them with what your frame requires. If you had a quick release on your old bike, and your new one needs a 12mm thru-axle, you are in luck. We have replaceable parts to fit your compatibility needs.

I am happy to say that we now carry Indigenous Wheel Co. Centerlock hubsets! Not only  are they highly adaptable, they come in at impressive weights that rival competitors at almost a third of the cost.

img_8216

The Specs

  • Front Hub:
    • 45mm Tall Flanges
    • 125-145g | QR | 12mm | 15mm Thru-Axle options
    • Centerlock
  • Rear Hub:
    • 45mm Tall Non-DS Flange
    • 51mm Tall DS Flange
    • 230-250g | QR | 12×135* | 12×142 Thru-Axle options
    • Centerlock
    • 6 Pawls | 48 Contact Points | Engagement every 7.5º
    • *12x135mm axle is non-scs compatible
    • This slideshow requires JavaScript.

      If you are interested in a build with these hubs, feel free to fill out the Wheel Quote form. I look forward to talking wheels with you.

Joey Mullan

Trackbacks & Pings

  • New: Build No. 4 | Indigenous Wheel Co. :

    […] Wide, 28mm Deep | Disc Specific Rims | Tubeless Ready | 28 hole | Black -Laser Engraved | Centerlock | Shimano 10/11 | Black  | 12 x 142mm / QR -Laser Engraved | Centerlock | Black | 15mm Thru /12mm Thru / QR -Sapim D-Light Spokes |  Black | […]

    2 years ago

Leave a Reply Text

Your email address will not be published. Required fields are marked *

X